Process Data set: APL StrongBak™ & Tritherm™ Framing System (en) en
Process information
| Key Data Set Information | |||
| Reference year | 2026 | ||
| Name |
| ||
| Technical purpose of product or process | The product is a non-combustible built-up system that comprises of an internal steel liner profile fixed to either primary or secondary steel that uses the APL Tritherm™ spacer system to provide the required cavity depth in order to meet the thermal, structural, acoustic and fire-resistance performance. The steel liner profile is produced from either a hot-dip galvanised (Z275), Aluzinc or zinc-magnesium steel substrate and then formed into a liner-tray profile with a range of thickness from 0.75mm to 1.5mm. These can be combined with an additional organic coating to provide a pre-painted external surface. These profiles are produced using a combination of processes, generally being profiling and cold roll forming without damaging the top surface. Perforation of the substrate can also be achieved. APL Tritherm™ is a range of metal secondary support framing to allow for the creation of a cavity outside of the liner tray or profile using a range of thermally-broken steel sections. The steel sections are generally produced using a combination of processes, generally being bending, profiling, punching and cold roll forming. The steel section substrate is either pre- galvanised (Z275) or a zinc-magnesium equivalent. It consists of a range of steel tophat and zed-sections that combine with thermally-broken helping hand or RWB brackets to provide the required cavity depth in order to meet the thermal, structural, fire and acoustic performance. All fixings used within the system are stainless steel. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The product is a non-combustible built-up system that comprises of an internal steel liner profile fixed to either primary or secondary steel that uses the APL Tritherm™ spacer system to provide the required cavity depth in order to meet the thermal, structural, acoustic and fire-resistance performance. The steel liner profile is produced from either a hot-dip galvanised (Z275), Aluzinc or zinc-magnesium steel substrate and then formed into a liner-tray profile with a range of thickness from 0.75mm to 1.5mm. These can be combined with an additional organic coating to provide a pre-painted external surface. These profiles are produced using a combination of processes, generally being profiling and cold roll forming without damaging the top surface. Perforation of the substrate can also be achieved. APL Tritherm™ is a range of metal secondary support framing to allow for the creation of a cavity outside of the liner tray or profile using a range of thermally-broken steel sections. The steel sections are generally produced using a combination of processes, generally being bending, profiling, punching and cold roll forming. The steel section substrate is either pre- galvanised (Z275) or a zinc-magnesium equivalent. It consists of a range of steel tophat and zed-sections that combine with thermally-broken helping hand or RWB brackets to provide the required cavity depth in order to meet the thermal, structural, fire and acoustic performance. All fixings used within the system are stainless steel. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Biogenic carbon content |
| ||
| Time representativeness | |||
| Data set valid until | 2031 | ||
| Technological representativeness | |||
| Technology description including background system | The product is a non-combustible built-up system that comprises of an internal steel liner profile fixed to either primary or secondary steel that uses the APL Tritherm™ spacer system to provide the required cavity depth in order to meet the thermal, structural, acoustic and fire-resistance performance. The steel liner profile is produced from either a hot-dip galvanised (Z275), Aluzinc or zinc-magnesium steel substrate and then formed into a liner-tray profile with a range of thickness from 0.75mm to 1.5mm. These can be combined with an additional organic coating to provide a pre-painted external surface. These profiles are produced using a combination of processes, generally being profiling and cold roll forming without damaging the top surface. Perforation of the substrate can also be achieved. APL Tritherm™ is a range of metal secondary support framing to allow for the creation of a cavity outside of the liner tray or profile using a range of thermally-broken steel sections. The steel sections are generally produced using a combination of processes, generally being bending, profiling, punching and cold roll forming. The steel section substrate is either pre- galvanised (Z275) or a zinc-magnesium equivalent. It consists of a range of steel tophat and zed-sections that combine with thermally-broken helping hand or RWB brackets to provide the required cavity depth in order to meet the thermal, structural, fire and acoustic performance. All fixings used within the system are stainless steel. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2026-05-25T16:54:42.517+02:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 47638077-dbbe-543e-9d3b-f48c352eda8c |
| Date of last revision | 2026-02-20T15:15:51 |
| Data set version | 00.01.000 |
| Preceding Data set version | |
| Registration authority | |
| Registration number | HUB-5463 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle