Process Data set: Biddle SR M-200-E Electric air curtain (en) en
Process information
| Key Data Set Information | |||
| Reference year | 2026 | ||
| Name |
| ||
| Technical purpose of product or process | The SR air curtain has been developed to deliver greater comfort than a conventional air curtain, whilst providing considerable energy savings. The SR does not act as a barrier in the place of an open door, but it reduces the amount of warm air leaving the building and conditions the incoming air to a comfortable temperature. The SR air curtain delivers the right air flow and temperature at the right time automatically, ensuring optimal climate separation and reducing energy loss and offers a unique air damper system to improve efficiency by controlling the outlet velocity. The impressive results achieved by the SR are made possible thanks to a combination of four technologies. The revolutionary patented i-sense infrared technology collects all temperature related data in the doorway. CHIPS technology translates this information into the correct setting, whilst the adaptable discharge width (Controlled Air strength technology) and the patented rectifier technology create the perfect climate separation. The SR can be supplied to suit many heating mediums, with water, electric, a combination of low grade water and electric (Hybrid) and ambient models all being available. The SR is designed for door heights from 2.0 to 4.0 m and is mounted horizontally above door openings in shopping malls, shops, stores, supermarkets and other commercial spaces. This EPD covers multiple models in the electric SR range and is based on the SR M-200-E. This model was chosen as representative model because it's technically the middle of the full range of products and additionally the bestselling product. The EPD is applicable for the following units in F/R/C versions: S-100-E, S-150-E, S-200-E, S-250-E, M-100-E, M-150-E, M-200-E, M-250-E, L-100-E, L-150-E, L-200-E, L-250-E, XL-100-E, XL-150-E, XL-200-E, XL-250-E Please see the annex for more information on variability. The casing is made of zinc plated sheet steel and has an inspection panel in the bottom. The inlet grilles are made of anodised aluminium with fixed fins. The inlet module and the end panels as well as the casing are, as a standard, supplied in silver grey (RAL 9006) or traffic white (RAL 9016). The air curtain is equipped with two or more (depending on type) dual-inlet, vibration free suspended centrifugal fans. The SR Electric is made up of electric heating elements with aluminium fins. The exchanger is controlled by the electronic control unit and is fitted with overload protection. Further information can be found at: www.Biddle.nl | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The SR air curtain has been developed to deliver greater comfort than a conventional air curtain, whilst providing considerable energy savings. The SR does not act as a barrier in the place of an open door, but it reduces the amount of warm air leaving the building and conditions the incoming air to a comfortable temperature. The SR air curtain delivers the right air flow and temperature at the right time automatically, ensuring optimal climate separation and reducing energy loss and offers a unique air damper system to improve efficiency by controlling the outlet velocity. The impressive results achieved by the SR are made possible thanks to a combination of four technologies. The revolutionary patented i-sense infrared technology collects all temperature related data in the doorway. CHIPS technology translates this information into the correct setting, whilst the adaptable discharge width (Controlled Air strength technology) and the patented rectifier technology create the perfect climate separation. The SR can be supplied to suit many heating mediums, with water, electric, a combination of low grade water and electric (Hybrid) and ambient models all being available. The SR is designed for door heights from 2.0 to 4.0 m and is mounted horizontally above door openings in shopping malls, shops, stores, supermarkets and other commercial spaces. This EPD covers multiple models in the electric SR range and is based on the SR M-200-E. This model was chosen as representative model because it's technically the middle of the full range of products and additionally the bestselling product. The EPD is applicable for the following units in F/R/C versions: S-100-E, S-150-E, S-200-E, S-250-E, M-100-E, M-150-E, M-200-E, M-250-E, L-100-E, L-150-E, L-200-E, L-250-E, XL-100-E, XL-150-E, XL-200-E, XL-250-E Please see the annex for more information on variability. The casing is made of zinc plated sheet steel and has an inspection panel in the bottom. The inlet grilles are made of anodised aluminium with fixed fins. The inlet module and the end panels as well as the casing are, as a standard, supplied in silver grey (RAL 9006) or traffic white (RAL 9016). The air curtain is equipped with two or more (depending on type) dual-inlet, vibration free suspended centrifugal fans. The SR Electric is made up of electric heating elements with aluminium fins. The exchanger is controlled by the electronic control unit and is fitted with overload protection. Further information can be found at: www.Biddle.nl | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Biogenic carbon content |
| ||
| Time representativeness | |||
| Data set valid until | 2031 | ||
| Technological representativeness | |||
| Technology description including background system | The SR air curtain has been developed to deliver greater comfort than a conventional air curtain, whilst providing considerable energy savings. The SR does not act as a barrier in the place of an open door, but it reduces the amount of warm air leaving the building and conditions the incoming air to a comfortable temperature. The SR air curtain delivers the right air flow and temperature at the right time automatically, ensuring optimal climate separation and reducing energy loss and offers a unique air damper system to improve efficiency by controlling the outlet velocity. The impressive results achieved by the SR are made possible thanks to a combination of four technologies. The revolutionary patented i-sense infrared technology collects all temperature related data in the doorway. CHIPS technology translates this information into the correct setting, whilst the adaptable discharge width (Controlled Air strength technology) and the patented rectifier technology create the perfect climate separation. The SR can be supplied to suit many heating mediums, with water, electric, a combination of low grade water and electric (Hybrid) and ambient models all being available. The SR is designed for door heights from 2.0 to 4.0 m and is mounted horizontally above door openings in shopping malls, shops, stores, supermarkets and other commercial spaces. This EPD covers multiple models in the electric SR range and is based on the SR M-200-E. This model was chosen as representative model because it's technically the middle of the full range of products and additionally the bestselling product. The EPD is applicable for the following units in F/R/C versions: S-100-E, S-150-E, S-200-E, S-250-E, M-100-E, M-150-E, M-200-E, M-250-E, L-100-E, L-150-E, L-200-E, L-250-E, XL-100-E, XL-150-E, XL-200-E, XL-250-E Please see the annex for more information on variability. The casing is made of zinc plated sheet steel and has an inspection panel in the bottom. The inlet grilles are made of anodised aluminium with fixed fins. The inlet module and the end panels as well as the casing are, as a standard, supplied in silver grey (RAL 9006) or traffic white (RAL 9016). The air curtain is equipped with two or more (depending on type) dual-inlet, vibration free suspended centrifugal fans. The SR Electric is made up of electric heating elements with aluminium fins. The exchanger is controlled by the electronic control unit and is fitted with overload protection. Further information can be found at: www.Biddle.nl | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2026-03-26T18:34:07.603+01:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 91d2fc23-615b-5cdd-a9fd-0f617b39efed |
| Date of last revision | 2026-01-21T11:55:18 |
| Data set version | 00.01.000 |
| Preceding Data set version | |
| Registration authority | |
| Registration number | HUB-4659 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle