Process data set overview page

Data set: Akvanor DTM (00.01.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Akvanor DTM

Location

Reference year 2026

Valid until 2031

Reference flow(s) Akvanor DTM - 1.0 * 1.0 (Volume)

Type EPD

Parameterized? no

LCIA results included? yes

Category Material / Coatings Pastes / Paints

Synonyms

Use advice for data set

Data set use approval

General comment AKVANOR DTM is a fast drying, acrylic based waterborne semi-matt/semi-gloss paint with rust preventing pigments. Suitable as primer or topcoat as well as a single coat/direct to metal (DTM) paint. Recommended on steel surfaces in environment classes C1 – C3. Suitable for fast painting of machinery and equipment, structural steel in warehouses and factories, internal surfaces in ships, electric motors, air conditioners and steel doors etc. PRODUCT APPLICATION The surface should be dry and clean when applied. Applied with an airless spray, mohair roller or brush. The paint must be thoroughly mixed before application. TECHNICAL INFORMATION Spreading rate (typical): 4 - 6 m²/L Dry film thickness: 80 - 120 μm Finish: Semi-matt / Semi-gloss PHYSICAL PROPERTIES OF THE PRODUCT Volume of solids: 48 ± 2% Mass of solids: 705 g/L VOC-value: 50 g/L Density: 1,23 kg/L

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Accredited third party review by Sarah Curpen

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Nor-Maali Oy

Technical purpose AKVANOR DTM is a fast drying, acrylic based waterborne semi-matt/semi-gloss paint with rust preventing pigments. Suitable as primer or topcoat as well as a single coat/direct to metal (DTM) paint. Recommended on steel surfaces in environment classes C1 – C3. Suitable for fast painting of machinery and equipment, structural steel in warehouses and factories, internal surfaces in ships, electric motors, air conditioners and steel doors etc. PRODUCT APPLICATION The surface should be dry and clean when applied. Applied with an airless spray, mohair roller or brush. The paint must be thoroughly mixed before application. TECHNICAL INFORMATION Spreading rate (typical): 4 - 6 m²/L Dry film thickness: 80 - 120 μm Finish: Semi-matt / Semi-gloss PHYSICAL PROPERTIES OF THE PRODUCT Volume of solids: 48 ± 2% Mass of solids: 705 g/L VOC-value: 50 g/L Density: 1,23 kg/L

Input Products No records found.

Co-Products No records found.

Data set version 00.01.000

Time stamp (last saved) 2026-05-06T19:03:33.952+02:00

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Not defined) ISO 14025 (Overall compliance: Not defined)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo